Wrought Iron Metal 48(L) x30(H) Spark Guard Cover(Black)

Master Flame is a Class "A" Flame Retardant intended for use on wood, fabric, and other absorbent materials. When properly applied, it prevents dangerous flames from spreading and inhibits the development of toxic smoke. Our premium-grade, non-toxic formulation is easy to apply and dries clear. Master Flame is a trusted safety solution, certified for efficacy by NFPA 701, ASTM E-84, and California Title 19.

It is important to note that Master Flame is not compatible with waterproof materials or polymer materials, as it is unable to penetrate their cellular structure.

To use Master Flame, evenly distribute it on all sides of the item or surface being treated using a spray device. Allow it to dry for 24 hours and repeat as needed. For smaller items, you can fill a container with Master Flame and dip them to soak. Heavy application may cause slight residue, which can be removed using a damp towel.

Before applying a second coat, it is essential to allow Master Flame to penetrate the item or surface and air-dry for 24 hours. If you are spraying onto a vertical surface where drain-off is possible, multiple applications may be necessary.

If you are applying paint or sealer in addition to Master Flame, it is important to apply Master Flame first and allow 24-48 hours for it to cure before applying a water-based latex paint or sealer on top. For materials exposed to outdoor elements, a water-based sealer is required for best results. The use of oil-based sealers and paints will negatively impact Master Flame's effectiveness.

Before the full application of Master Flame, it is recommended to perform a small-scale test to evaluate material compatibility. Begin by applying Master Flame to a small sample of the desired material and let it dry for 24 hours. Once the sample is dry, carefully hold the material vertically and apply a small flame (butane lighter or match) to the treated portion for 10 seconds, then promptly remove the ignition source. If the flame extinguishes within two (2) seconds, you may proceed with the full application.

Our coverage estimates are approximate, and actual results may vary based on the material being applied. Master Flame is NFPA 255, 701, and ASTM E 84 tested, with a Class 'A' rating, making it a non-toxic, eco-friendly solution that helps prevent the spread of dangerous flames.

product information: